ABB Dealer in Anjar GIDC | A Buyer’s Guide to SACE FORMULA DSA MCCBs

If you’re looking for an ABB dealer in Anjar GIDC, a request for a “125 A ABB breaker” is a useful start. For a panel builder preparing a quotation, three more details can settle the choice: the operating voltage, the short-circuit rating required at the panel and the type of protection the feeder needs. Two breakers can carry the same load current and still have different fault ratings, trip units and mounting dimensions.

Ahmedabad Electrical Corporation (AEC) supplies genuine ABB low-voltage switchgear to Anjar and across Kutch through AIM Innovations, the group’s authorised ABB distributor. For contractors, machine builders and plant maintenance teams, the ABB SACE FORMULA DSA range is a practical starting point for specifying a moulded case circuit breaker (MCCB).

Which ABB FORMULA DSA MCCB fits your panel?

ABB’s IEC FORMULA DSA range covers 15 A to 630 A across four frames, A0, A1, A2 and A3. The family includes one-, two-, three- and four-pole configurations, with breaking capacities reaching 50 kA at 415 V AC on selected versions. Use the data sheet for the exact catalogue number when approving a quotation.

• For a distribution feeder, record the design current, cable capacity and panel voltage. Ask the panel designer to confirm the prospective short-circuit current at the installation point. The ampere rating describes the load the breaker can carry. The breaking capacity, expressed in kiloamperes at a stated voltage, describes the fault it can interrupt.
• For a motor feeder, tell the supplier how the motor starts and which device provides overload protection. A pump started directly on line draws a different starting current from one supplied through a drive. For a contactor starter, have the designer check the breaker, contactor and overload relay as a coordinated combination.
• For a replacement, send a clear photograph of the existing breaker label and its full ABB order code. Include the pole count, trip-unit marking, cable or busbar connections and any door-mounted handle. These details let the supplier check both electrical suitability and physical fit.
• For a compact enclosure, check depth before releasing the panel drawing. ABB lists a breaker depth of 60 mm for A0–A2 and 103.5 mm for A3. Allow additional space for terminals, cable bends, covers and the operating handle.

What should an Anjar buyer ask for in the quotation?

Consider a workshop adding a feeder for a second production line. The purchase team has the approved current rating, but the panel drawing also calls for a door handle and remote trip. A quotation for the bare MCCB leaves two questions open. Does the handle fit the panel depth, and does the shunt release match the control supply? Listing each accessory against the breaker reference lets the buyer compare the actual assemblies and see which items are ready for dispatch.

For a maintenance spare, keep the approved ABB reference in the stores register alongside the panel name and feeder number. When the material arrives, match the order code and ratings on the device and carton against the quotation and invoice. Retain the invoice and applicable warranty details with the panel records. The next buyer can then reorder the correct configuration even if the original panel builder is unavailable.

Delivery to Anjar, Kutch and Gujarat industrial estates

AEC supplies major Gujarat cities, GIDC estates and smaller industrial clusters. For a factory delivery, include the estate phase, plot or shed number, PIN code and receiving contact. This matters particularly when the billing office and plant gate are in different towns.

• Anjar and Kutch — Anjar GIDC, Gandhidham, Adipur, Kandla, Bhuj, Bhachau and Mundra.
• Rajkot, Morbi and Jamnagar — Aji, Bhaktinagar, Metoda, Shapar–Veraval, Gondal, Wankaner, Dared and Shankar Tekri.
• Bhavnagar, Junagadh and Surendranagar — Chitra, Sihor, Shapar near Junagadh’s Veraval corridor, and Wadhwan.
• Ahmedabad and Gandhinagar — Vatva, Naroda, Odhav, Kathwada, Sanand, Changodar, Bavla, Kalol and Chhatral.
• North Gujarat — Mehsana, Dediyasan, Kadi, Gozaria, Visnagar, Himmatnagar and Palanpur.
• Vadodara and Central Gujarat — Makarpura, Nandesari, Savli, Waghodia, Halol, Nadiad and Anand’s Vithal Udyognagar.
• Bharuch and South Gujarat — Ankleshwar, Panoli, Palej, Jhagadia, Dahej, Surat’s Sachin and Pandesara estates, Navsari, Bilimora, Valsad–Gundlav, Vapi, Sarigam and Umbergaon.

Ready stock and pan-India supply. Alongside FORMULA DSA MCCBs, we supply ABB industrial breakers, MCBs, RCCBs, contactors and motor-protection equipment, with ready stock on selected references. Our delivery targets for confirmed stock are 4–5 days within Gujarat and 5–6 days to major Indian metros, including Mumbai, Delhi NCR, Bengaluru, Hyderabad and Chennai. For an Anjar shutdown or a new panel build, send your bill of materials, delivery PIN code and required-on-site date for an item-wise stock check. Request an ABB switchgear quotation from AEC